Consumer Unit and Circuit Schedule
Leave a legible schedule in the lid of the board so the next person to open it knows what every way does without tracing cables.
TJ-09 1 page
Trade job forms · TJ-06
Cable Run and Containment Record
A free printable cable run record sheet — every containment run and cable pulled, from where to where, type and size, and whether it was tested and labelled.
Download Free · no sign-up
2 pages. Choose your paper size — both versions are laid out identically, so neither one gets shrunk to fit.
Print it and write on it
Fill it in type and save
The fillable versions have real form fields — open them in any PDF reader, type into them and save. Printing help.
What this sheet is for
Produce as-built information for the certificate, the client and the next person to open the ceiling, instead of reconstructing it from memory.
Who it is for
Electricians and data installers on fit-outs, and site supervisors who have to hand over as-built records.
How to use it
- Record each containment run first, with its route, fixings and whether penetrations were fire-stopped.
- Log every cable or bundle against the containment it runs in.
- Tick termination, test and label as each end is finished — not at the end of the week.
- Have a second person check the sheet against the drawing before it goes to the client.
What is on the sheet
2 pages, in this order:
Page 1
Printed under the title: Every cable pulled on a job and the containment it runs in: from where to where, what it is, how it is supported, and whether it was terminated, tested and labelled before you left.
Your design, recorded as built. Cable sizes, support spacing, bend radii and fire-stopping detail come from your design, the cable maker's data and the rules where you work. Write what was installed; the columns are blanks, not limits.
Write-on lines: Site · Area / floor · Date · Installed by · Drawing / design ref · Client / main contractor · Labelling scheme
Containment — one row per run of tray, trunking, conduit or basket
Table, 11 rows: Ref · Type · Route · Fixing / support · Fire-stopped · Earthed · Done
Page 2
Cables — one row per cable or bundle
Table, 14 rows: Run · From · To · Cable type · Size / cores · In · Length · Term. · Tested · Label
Ruled lines: Deviations from the drawing, access left open, anything for the client
Signature strip: Installed by · Checked by · Date
Questions
Why no column for the test results?
Because results belong on the test certificate your scheme issues, in its own format. This sheet says the cable exists, where it goes and that it was tested; the certificate says what the test found.
Where are the support spacings and bend radii?
In your design and the cable maker's data, not on this sheet. Write what you installed; the columns are blanks to be filled, not limits to be met.
Related sheets
CCTV Camera Position and Setup Record
Be able to explain, months later, where each camera points, what was masked and who was given access — to the customer, a neighbour or anyone who asks.
TJ-08 1 page
Alarm System Installation Record
Give the customer, the monitoring centre and whoever services the system next a single page that says exactly what is fitted and where.
TJ-02 1 page
Job Sheet
Capture a job while you are still standing in it: what was asked for, what was done, what went into it and how long it took.
WT-05 2 pages
