Needle and Sharps Disposal Record
Show, for any container, who put it into use, who sealed it and when it left the premises with whom — without hunting through a drawer of receipts.
SA-14 1 page
Salon and studio · SA-20
Sterilisation Cycle Log
A free printable autoclave log sheet — each cycle with load, programme, display reading, indicator result, release and operator, plus tests and servicing.
Download Free · no sign-up
One page. Choose your paper size — both versions are laid out identically, so neither one gets shrunk to fit.
Print it and write on it
Fill it in type and save
The fillable versions have real form fields — open them in any PDF reader, type into them and save. Printing help.
What this sheet is for
Show for any tool on any day that it went through a cycle, what the machine reported and who released the load.
Who it is for
Tattoo studios, piercers, beauty salons, podiatry and clinic rooms running an autoclave or steriliser for reusable tools.
How to use it
- Fill in the machine's make, model and serial once at the top.
- Log each run as it happens: what was in it, the programme, the time started and who ran it.
- Write the reading the display showed and what the indicator showed, then whether the load was released.
- Record tests, faults and servicing in the lower table as your manual and your rules call for.
What is on the sheet
One page, top to bottom:
Printed under the title: Every run of an autoclave or steriliser — what was in it, who ran it, what the display and the indicator showed, and whether the load was released.
Their figures, your readings. The values a cycle has to reach, the indicators you use and how often the machine is tested are set by its manufacturer and the rules where you work. Write what the display and the indicator actually showed; whether that passes is a judgement you make against their figures, not ours.
Write-on lines: Machine make & model · Serial no. · Location · Month
Cycles — one row per run
Table, 6 rows: Date · Cycle no. · Load contents · Programme · Time started · Display reading · Indicator · Released · Operator
Tests, faults and servicing — as the manual and your rules call for
Table, 4 rows: Date · Test or event · Result · Action taken · Initials
Questions
Why is there no temperature or pressure printed as the pass mark?
Because the values a cycle must reach are set by the machine's manufacturer and the rules where you work, and differ by machine and programme. The column takes what the display showed; whether that passes is judged against their figures.
What if a cycle fails?
Mark the indicator or release column as failed, note what you did in the tests and faults table, and do not release the load. What happens next is your procedure and the manufacturer's.
Related sheets
Salon Equipment Service Record
Have the make, model and serial to hand when something breaks, and a history that shows which items keep failing and which are due a check.
SA-19 1 page
Piercing Jewellery and Site Record
Reorder the exact piece that went in, and see the history of a site when a client comes back with a concern or for a downsize.
SA-16 1 page
Fridge and Freezer Temperature Log
Show that an appliance was checked, twice a day, by someone who wrote down what they saw. A run of readings shows drift long before one reading shows a failure.
CR-06 1 page
